The workpiece processed by the press can be placed for 20 minutes (to ensure the initial curing of the glue) before trimming.

After trimming, scrape the edges and corners with special tools or chamfer the edges with 120#-180# sandpaper to make the PVC lower than the surface of the workpiece. And use thinner such as alcohol to clean up the glue marks on the back. Check the quality when trimming, repair on-site if it can be repaired, and sort out those that cannot be repaired separately.

After film pressing, the workpieces should be placed face to face and back to back on a flat rack. A stack of 50 pieces, with heavy objects pressed on it to prevent deformation of the workpiece, and the storage time should not be less than 24 hours. It takes 24 hours for the film-pressed workpiece to reach mid-term curing, and 7 days for complete curing, so make sure that the workpiece is stored for more than 24 hours before packaging.